Description
Digi-Pulse™ Flow Monitor For 800 and 900 series FASTPRIME liquid ends w/ 3.5mm connector
Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to electrically signal a low flow or no flow condition, you can be assured of your pumping performance; an advantage when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording device. The FM-259/359/459/859 transmitters are wired to be plugged directly into the receptacles of Series B9/C9 pump housings. Additionally, the FM-879 can be directly plugged into the flow monitor input (4-pin connector) on the Series AD9 pump housing. The Digi-Pulse™ Flow Monitor is adjustable to any desired pulsating flow rate within its range
Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to electrically signal a low flow or no flow condition, you can be assured of your pumping performance; an advantage when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording device. The FM-259/359/459/859 transmitters are wired to be plugged directly into the receptacles of Series B9/C9 pump housings. Additionally, the FM-879 can be directly plugged into the flow monitor input (4-pin connector) on the Series AD9 pump housing. The Digi-Pulse™ Flow Monitor is adjustable to any desired pulsating flow rate within its range
