Description
Tweco Model HD24LB-62F 3.100" Heavy Duty Tapered Nozzle For Up To 450A Series MIG Guns
Features :
Easy identification - part no rolled stamped on the outside surface
Nozzle housing - cut and formed from red brass alloy 230
Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
Nozzle insert - machined from a solid brass allow and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser
Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Product Attributes :
MIG Amperage Range : Up To 450A
Consumables Type : Nozzle
Length : 3.1 in
Tip Series : HD24 Series
Material : Red Brass Alloy 230
Tip Relationship : Flush, Recessed
MIG Gun Model : Tweco
Bore : 0.625 in
Features :
Easy identification - part no rolled stamped on the outside surface
Nozzle housing - cut and formed from red brass alloy 230
Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
Nozzle insert - machined from a solid brass allow and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser
Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Product Attributes :
MIG Amperage Range : Up To 450A
Consumables Type : Nozzle
Length : 3.1 in
Tip Series : HD24 Series
Material : Red Brass Alloy 230
Tip Relationship : Flush, Recessed
MIG Gun Model : Tweco
Bore : 0.625 in