Description
5200 Series Chemical Injector Pump
Air/Gas Operated
Stainless Steel Head, High Pressure Packing
Plunger Packing: 1/2" Buna Packing/ Buna O-Ring
Pressure Range: 1500 STD-3500HP
Flomore's gas driven 5200 Series Injector utilizes a molded diaphragm to drive a piston through chevron Packing making it a positive displacement pump capable of discharge pressures of 6,500 PSIG.
A simple rotary switching Valve (B-0446) directs the incoming operating gas (35 PSI MAX) behind the diaphragm (C-0290) which causes the pump to stroke forward. The Valve then shuts off the inlet gas and opens to exhaust the spent gas behind the diaphragm, a large spring returns the diaphragm and the sequence begins again. A choice of three plunger sizes, two stroke lengths and controllable strokes per minute with an optional slow speed controller allows a wide range of volumes to be pumped, from less than a quart to 30 gallons per day.
Air/Gas Operated
Stainless Steel Head, High Pressure Packing
Plunger Packing: 1/2" Buna Packing/ Buna O-Ring
Pressure Range: 1500 STD-3500HP
Flomore's gas driven 5200 Series Injector utilizes a molded diaphragm to drive a piston through chevron Packing making it a positive displacement pump capable of discharge pressures of 6,500 PSIG.
A simple rotary switching Valve (B-0446) directs the incoming operating gas (35 PSI MAX) behind the diaphragm (C-0290) which causes the pump to stroke forward. The Valve then shuts off the inlet gas and opens to exhaust the spent gas behind the diaphragm, a large spring returns the diaphragm and the sequence begins again. A choice of three plunger sizes, two stroke lengths and controllable strokes per minute with an optional slow speed controller allows a wide range of volumes to be pumped, from less than a quart to 30 gallons per day.
