Description
Series JGR: Gear Drive Mixer, Angle-Riser Mount 350 RPM Heavy Helical Gear, Grease Lube 1 1/2HP-3-230/460-EP Double Prop
General Features:
No clutches to slip, wear or replace.
316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon also available upon request.
Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
Vibration-absorbing pad standard.
Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available upon request.
Gears run in grease lubrication.
Cannot leak oil.
All JGR mixer shaft bearings are permanently lubricated.
Cast aluminum housing.
Angle-riser mount provides a fixed
10° angle of entry.
General Features:
No clutches to slip, wear or replace.
316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon also available upon request.
Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
Vibration-absorbing pad standard.
Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available upon request.
Gears run in grease lubrication.
Cannot leak oil.
All JGR mixer shaft bearings are permanently lubricated.
Cast aluminum housing.
Angle-riser mount provides a fixed
10° angle of entry.