Description
Series JGF: Gear Drive Mixer, Flange Mount With Stuffing Box 350 RPM, Heavy Helical Gear, Grease Lube 1HP Air Motor (Air Requirements: 40CMF at 40PSI) Single Prop
General Features:
No clutches to slip, wear or replace.
316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon also available upon request.
Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
Vibration-absorbing pad standard.
Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available upon request.
Gears run in grease lubrication. Cannot leak oil.
All JGF mixer shaft bearings are permanently lubricated.
Cast aluminum housing.
Flange stuffing box rated to 15 PSI.
Standard mounting flange is 6" carbon steel.
Optional flanges available in 8", 10", 12" or 14".
General Features:
No clutches to slip, wear or replace.
316SS propellers and shafts are standard. Optional coatings such as rubber, PVC or Teflon also available upon request.
Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
Vibration-absorbing pad standard.
Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available upon request.
Gears run in grease lubrication. Cannot leak oil.
All JGF mixer shaft bearings are permanently lubricated.
Cast aluminum housing.
Flange stuffing box rated to 15 PSI.
Standard mounting flange is 6" carbon steel.
Optional flanges available in 8", 10", 12" or 14".